BMW News
BMW has notified the National Highway Safety Administration of its intention to voluntarily recall more than 75,000 3 Series, 5 Series, X1, X3, and Z4 models due to a possible loss of power-brake assistance that could result in the vehicles failing to stop. The recall affects 2012–2014 models equipped with either the N20 or N26 engine produced from May 2012 to August 2013. Until recall repairs have been performed, BMW dealers will discontinue selling or delivering any affected vehicles in their inventories.
The problem has been traced to a restricted oil supply from the intake camshaft to the brake vacuum pump, which may cause the brake vacuum pump to fail, resulting in a loss of power-brake assistance. While the hydraulic brakes will still function, the driver must much apply greater pedal pressure and the distance required to stop the vehicle will increase.
BMW has reported three minor accidents with no confirmed injuries. According to Bimmerfest, drivers who encounter a braking problem should "pull the emergency brake and apply as much brake pedal pressure as possible. If your BMW has an electronic parking brake pull up and hold the switch to engage the brake." Drivers should then park in a safe location and contact BMW Roadside Assistance.
While a repair is not yet available and we have yet to see any official notice from NHTSA, BMW will begin notifying owners of the recall in November. Repairs will be performed free of charge. ––Paul Duchene
The affected models, are reported to be:
2012-14 320i/328i, 320i/328i xDrive Sedan manufactured between May 2012 – August 2013
2014 328i xDrive Sports Wagon manufactured between March 2013 – May 2013
2012-13 528i, 528i xDrive Sedan manufactured between June 2012 – June 2013
2013-14 X1 sDrive28i, X1 xDrive28i manufactured between June 2012 – June 2013
2013-14 X3 xDrive28i manufactured between June 2012 – August 2013
2012-14 Z4 sDrive28i manufactured between June 2012 – June 2013
